How to Fix HP Sprocket Printer Out of Paper?
RECENT POST
  • Tech Support Helpline
  • 15 May 2019

How to Fix HP Sprocket Printer Out of Paper?

The Sprocket is battery-powered through a Micro USB port. It encourages you to interface your telephone through Bluetooth, and requires Zink/HP photograph paper to work. Now and then, an out of paper error message shows on the HP sprocket application in view of utilizing an obsolete firmware. After encountering HP Sprocket Printer out of Paper Error, your printer quits nourishing any photograph paper to stack and furthermore the status pointer light flickers and turns red. To adapt up this obstacle, you have to avail HP Customer Support from the deft epicureans. Ensure the specialists with whom you are taking help are gifted and capable. By taking assistance from the non-tech and non-proficient individual will be totally wastage of time just as cash. 

In case,  that you are unable to print to the printer with the HP Sprocket application, at that point endeavor to associate HP sprocket appropriately to some other devices. Because of connection error, you can't print any paper. Hence, check the USB link or system connection first and afterward attempt to print. This bearing will be valuable for you. In this way, simply try once.
 
Steps To Fix HP Sprocket Printer Out Of Paper Error 

Follow the  under- mentioned steps as these means will help you in ending the Out of Paper Error, take a brief  look at once

• On the HP Sprocket application, contact "ok" to clear the blunder message 
• Turn off the printer 
• Evacuate the top spread by sliding it far from the yield opening, and after that set it away again appropriately. You can do this by basically sliding the top spread and after that expelling the top spread 

• In the event that any free photograph paper is embedded into the paper plate, expel them right away 
• Reload the HP Sprocket Photo Paper with the blue card. Ensure the blue card is on the base of the stack, and the HP Sprocket Photo Paper with the HP logos 
• Presently, turn-on the printer and after that resend the print work 

When you have finished with the above techniques plainly, Printer out of Paper Error message will be vanished from the HP Sprocket application. In any case, on the off chance that still a similar issue is facing, at that point with no perplexity get HP Printer Support. Out top-most tech-nerds will enable you to out at insignificant expense.

In case, a part of this you have any other technical issue related to HP printer setup issue or any other you may contact to HP printer support number +1-844-522-3668 and the certified technician will provide you the solution for your issue.

Quick Enquiry